Grid-tied Solar System With Battery Backup

SGBB-5 KW

This type of system is for those want protection from blackouts and other power loss but still want to be connected to the grid.

This system has all of the features and benefits of a standard grid-tied system, but with the additional benefit of uninterruptible power. With this system, you can still take advantage of the net metering, the Solar Rebate program (minus the cost of the batteries), and grid connection benefits.

 

 

With the battery backup, you are still connected to the grid as with the standard grid-tied system, But when the utility grid is down - the battery backup kicks in and delivers power to critical appliances and electrical devices (refrigerator, radio, electric heater, computers, etc.) when you need it most.

This means that you are protected by blackouts or any other power loss, which can provide peace of mind in a time of uncertainty of our existing electricity infrastructure. However, the battery backup option adds additional cost of the system.

How it works:

1) Sunlight hits the solar module, which is attached to your roof with the mounting racks.
2) The solar (or photovoltaic) cells inside the module then convert the light into electricity.
3) This electricity travels through wires to the charge controller, which senses battery voltage and regulates battery charging - the electricity is then used to keep the batteries fully charged to ensure uninterruptible power
4) The remaining electricity is then transferred to the inverter, which takes the electricity from the solar module (DC electricity) and converts it into the electricity your home needs to run your appliances, lighting, etc. (AC electricity)
5) This AC electricity then travels to your standard utility breaker box, and is supplied to your new utility net meter - which then of course feeds the electricity both to your home and to the electrical utility grid.
6) In the event of an emergency (blackout or power loss), your system automatically begins to draw power from the backup batteries and converts it into electricity. The Backed-Up AC Service Panel feeds into the appliances and other electrical needs you deem necessary in the event of power loss.

 

The main components of this system are:

1. 20 pc of 250W Solar modules 250P-60
2. 20 sets of Mounting racks
3. 5KW Solar Grid Tie Inverter/charger, InBack 5KW
4. 8 x 12V/200Ah Battery bank

ASNM250P-60 Series Polycrystalline Silicon PV Panel
ELECTRICAL  FEATURES
STC: Irradiance 1000 W/m2, 25°C, AM=1.5 according to EN 60904-3)
Module Type	250P-60
Module Efficiency              ŋm(%)	15,37
Cell Efficiency                ŋc(%)	17,54
Power Peak                    Pm(W)	250
Maximum Power Voltage         Vm(V)	30,71
Maximum Power Current         Im(A)	8,14
Open Circuit Voltage            Voc(V)	44,23
Short circuit current              Isc(A)	8,81
Maximum System Voltage         (VDC)	1000
Power output tolerances           ( % )	±3
Max-Series Fuse                  (A)	20
Operating/Storage Temp.          (°C)	-40 ~85
Dielectric Insulation Voltage        (VDC)	3000 max
TEMPERATURE CHARACTERISTICS - STC
NOCT–Nominal Operating Cell Temperature	45±2°C
Pm Temperature Coefficient   (%/°C)	-0.44
Voc Temperature Coefficient  (%/°C)	-0.36
Isc Temperature Coefficient   (%/°C)	0.033
MECHANICAL  FEATURES
Cell Size                       (mm)	156 x 156
Number of cells	6 x 10 – polycrystalline silicon cell
Module Dimensions              (mm)	1640 x 992 x 40
Module Weight                  (kg)	19
Front Glass	3.2mm tempered glass
Back Cover	TPT(Tedlar-PET-Tedlar)
Frame	Anodized aluminum alloy
Junction box	IP65-6 by-pass diodes serviceable
Connectors	IP67 type MC4
Output Cables                  (mm)	900
Container Loading	20GP : 348 pc,    40HQ : 700 pc

 

5KW Back Up Grid Tie Inverter/Charger
Models	InBack 5KW
Nominal DC Input Voltage	260VDC
Continuous Power Rating at 25°C	5,000W
AC Voltage/Frequency	220VAC 50 Hz
MPPT Voltage Range	150~550 VDC
Maximum Input Current	34 amps DC
Idle Power	10 Watts
Typical Efficiency	93%
Total Harmonic Distortion	2%
Output Voltage Regulation	±2%
Maximum Output Current	13.1 amps AC
AC Overload Capability	Surge 9 ,000W;   5 second  7,200W
AC Input Current Maximum	30 amps AC
Sell Back Voltage Range	208 to 232 VAC
AC Input Frequency Range	49.3 to 59.5 Hz
Battery Input Voltage Range	123 to 189 VDC
Continuous Battery Charge Output	25 amps DC
Operating Temperature Range	-40°C~60°C
Warranty	5 year
Shipping Weight/Dimensions	22 kg/ 370 x 600 x 160mm
Certificate	CE

 

 

Maintenance Free Lead Crystal Battery 12V/200AH New Technology The invention of the lead crystal battery is a breakthrough in battery history. Based on the composite electrolyte and proprietary intellectual property rights, makes the reaction of the electrolyte formation caused the forming for the crystal state. Advantages 1. Ideal green and environmental protection battery. Lead crystal battery is using special SIO2 composite electrolyte to replace the sulfuric acid solution of traditional lead-acid battery. The electrolyte is non-toxic, non-smell, to surrounding environment. 2. Excellent high and low temperature operating characteristics Working temperature from -40°C~65°C 3. Easy for depth discharge Working life of is no effected by the general over-discharge.   Excellent recovery capacity of charge-discharge. 5. Long working life Lead crystal battery can work for 10 to 15 years,  and charging time is 25% faster than normal lead-acid batteries and gel batteries. Item 6-CNFJ-200 Nominal Voltage 12V Nominal Capacity 200Ah Working Temperature -40°C~65°C Dimension  330 x 172 x 214mm Weight 62  kg Terminal type A/F Charge Cycle 1000 Working Life 10 – 15 years

 

Mounting  Racks